fine wire drawing machine line LZ8/400 Straight line Drawing Machine 1. Equipment Feature: the same as LZ7/560 Straight drawing machine 2. Equipment composition: (1) Ф800mm spool pay off stand (2) LZ8/400 straight line wire drawing machine (3) tension device (4)degreasing machine: water circulation+machinery scrubbing+sprinkling+high pressure blowing (5) Ф630mm spool take up machine (6) man-machine interface control touch screen (7)complete set electricity control cabinet 3. main technical parameter and points (1) Maximum enter-wire strength: ≤1000Mpa (2) Maximum enter-wire diameter: Ф2.4mm (3) Minimum enter-wire diameter: Ф0.8/1.0/1.2/1.6mm (4) Maximum compression rate: 85% (5) Maximum drawing speed: 20 m/s Normal speed:15-18m/s(Capacity:0.5T/H) (6) Water consumption and pressure: 5m3/h Water pressure≥0.2Mpa (7) Gas consumption and air pressure: 1.0m3/h Air pressure≥0.6Mpa (8) Motor: drawing machine and take up machine all adopt 11KW 50HZ AC frequency conversion motor (9)Reel: ①reel diameter: Ф400mm ②reel material: ZG45-55 steel, spray tungsten carbide hard alloy powder on the working surface, hardness is above HRC60, brightness≤0.4Ra, it is made by Zhengzhou Dayang Thermal Sprayed Company ③ Reel useful life: more than two years, replace freely when wear and tear within two years ④Reel cooling way: using slit-type water cooling inside. (10) Die box: ① the die box body using welding parts,spray tungsten carbide on guide wheel or guide roll surface.