MIG wire drawing machine LZ9/600 straight line drawing machine (2) tensile rack devices (3) Ф800 spool take-up machines (4) with human-machine interface touch screen control work station (5) complete electrical control cabinet 2 main technical parameters and points: (1) biggest inlet strength: 450MPa or less (2) the inlet diameter: Ф 5.5 or 6.5 mm (3) minimum outlet diameter Ф2.0 mm (4) max compression ratio: 90.5% (5)the highest drawing speed 16-12 m/s, normal speed:8-10m/s (6) water and water pressure: 8 m³/h water pressure 0.25 Mpa or more (7)air and pneumatic: 2.0 m³/h Air pressure 0.6 Mpa or more (8)motor A)the first use gear box of 37KW,the second to ninth 22 KW,AC conversion motor B)Take-up machine 18KW ac frequency conversion motor, (9) block: straight line type,diameter is 600mm block materials: stainless steel,ZG45 - 55,working surface, tungsten carbide spraying alloy powder, hardness more than HRC60 finish.32 Ra or less Using life: two years or more, since wear chamfer, free replacement. block cooling way: inner by slit type water-cooling, The outer cooled by ring air (10)mould(die) box adopts welded parts, surface of guide wheel or roller spraying tungsten carbide rod, using life is one year, since wear chamfer, free replacement. mode box body are two parties: lubrication powder body and the water body of indirect cooling mould(die) box can be adjusted universally to ensure the angle of wire drawing