flux cored welding wire drawing machine LZ7/560 Straight Line Drawing machine (Group) 1. Equipment comprising (1) wire drawing machine (group) (2) 800mm spool take-Up machine (3) Man-machine interface control contact screen (4) Whole set of electric console 2. Main technical parameter ( key points)： （1）Max. entering (steel) wire strength：<700MPa （2）Max. entering (steel) wire dia.：Ф5.5mm （3）Min.outlet (steel) wire dia.：Ф2.2mm （4）drawing steel wire material:ER70S-6 welding wire （5）Max. steel wire drawing speed：12m/s ( Normal speed: 10m/s) （6）Water volume ：6m3/h （Water pressure ≥0.25MPa） （7）Air volume：1.5m3/h （Air pressure ≥0.6MPa） （8）Motors：①drawing unit： 22KW AC freq. con. motor ②Take-Up unit：15KW AC freq. con. motor （9）Drum of drawing machine： ① material:steel ZG45~55, hardness alloy tungsten carbide is spraying-painted on working surface, with HRC60, roughness ≤1.6Ra. ②Drum using life:two years freely changed ③Drum cooling mode:narrow seam type water cooling for inner of drum. （10）Die box： ① Welding part is adopted for die box, the spraying-painted tungsten carbide is adopted for the surface of guide wheel and guide roller. ② The die box is divided into lub. powder cavity and water cooling cavity (water flowing automatically for cooling) ③ Die box is adjusted in universal directions.