straight line wire drawing machine Machine included: (1) LZ10/600 straight line drawing machine (2) tensile rack devices (3) Ф600 trunk type take up machine (4) with human-machine interface touch screen control work station (5) complete electrical control cabinet 2.main technical parameters and points: (1) biggest inlet strength:≦700MPa (2) biggest inlet diameter: Ф8.0mm (3) minimum outlet diameter:Ф2.0mm (4) max compression ratio: 93.7% each block reduction is 24% (5)the highest speed 14m/s, normal speed: 8-10m/s(finished wire 2.0mm) The capacity 0.8 ton one hour (6) water and water pressure: 6m³/h water pressure ≧0.25 Mpa (7)air and pneumatic: 2.0 m³/h Air pressure ≧0.6 Mpa (8)motor :(A) the main motor: the first block 30KW, and the rest 22KW, AC conversion motor （B）Take-up machine :15KW ac frequency conversion motor (9) block: straight line type A.diameter is 600mm----ten blocks B. block materials: stainless steel,ZG45 - 55,working surface, tungsten carbide spraying alloy powder, hardness more than HRC60 finish.32 Ra or less C. Using life: two years or more, since wear chamfer, free replacement. D.block cooling way: inner by slit type water-cooling (10)mould box adopts welded parts,surface of guide wheel or roller spraying tungsten carbide rod, using life is one year, since wear chamfer　free