Stainless steel wire drawing machine The main products include a complete set of wire drawing machines, which can pull large, medium, and small sizes from 6.5mm to 0.13mm; Stainless steel hydrogen annealing furnace and wire winding machine, wire drawing machine can pull from 8mm to 0.05mm. The drum and winding tank used for stainless steel are specially cast with white cast iron and other ingredients, with high hardness, wear resistance, and long service life. The galvanizing machine can coat 0.5-4mm iron wire onto the upper plate or main shaft, producing a flat and uniform shaft with the same degree of tightness. The straight wire machine can straighten 1.8-6.5 millimeters and is used for weaving nets, hardware construction, and other straight wire machines. The complete set of equipment for copper wire drawing machine can also be used to produce various wire mesh machinery, supporting products and accessories according to the user. Generally, the wire drawing machine is mainly driven by a wire laying motor, a wire winding motor and a wire arranging mechanism. As the wire winding diameter does not expand, the speed of the wire winding motor should be correspondingly reduced to ensure a constant wire speed. Tension feedback devices are often used in control to adjust the speed of the wire winding motor. With the continuous enhancement of frequency converter functions and stable performance, frequency converters have also been used in wire drawing machines.