Stainless steel wire production (drawing) machine line (6.5mm-1.0mm) Stainless steel wire production machine line A: 1. The process flow (￠6.5 mm) rod-----vertical pay-off-----film coating (with dryer)1# ---LZ7/600 straight line drawing machine (to) --￠3.0mm ----SG740H-spool take up 2 simple pay-off -- gas protection annealing furnace - headstand type coiler 3 vertical pay-off rod(3mm)---- film coating (dryer)2# -----straight line drawing machine LZ10/400 (to ￠1.0mm) - SG740 take up machine--layer winding machine B Introduction, (a) LZ7/600 straight drawing unit performance parameters Product name: LZ7/600 straight drawing machine 2 equipment: (1) vertical pay-off stand (2) LZ7/600 straight line drawing machines (3) SG740 h-wheel take-up machine (4) man-machine interface screen (5) set of control cabinets  3 work scope: (1) inlet diameter: 6.5mm (2) inlet line intensity: ≦ 800Mpa (3) material: stainless steel wire, etc (4) outlet 3.0 mm in diameter. Qualifying   4 drawing speed: (1) the highest speed: 6-10 meters per second (2)normal 8-9meters/SEC speed 5 (1) water vapor pressure > 0.2 Mpa (2) pressure > 0.5 Mpa  6 motor specification: (1) the drawing machine 30KW: AC general motors (2) take-up machine: 15KW ordinary ac motor  7. Drum forms: (1) : 600mm reel diameter (2) matrix of 45 steel drum materials, do surface spraying tungsten alloy, hardness HRC60 or above, the surface roughness HRC60 3.2 The last step is layer winding machine