Now let me show you what are in the package for our autopilot motor kit. There’re 2 layers of foams to contain all the items. When you open the box and remove the top foam, you’ll see the first layer. This is the cable with connector plug for the motor. There’re 7 wires, three wires are for RS232 signal, two wires are for power supply, two wires are for CAN signal. The cable length is 1.5 meter. This is the steering wheel. The diameter is 41cm. And we also supply some screws for installation. These screws are for supporting brackets. These screws are for steering wheel and brackets. These screws are for adapters. Now, we can move to the bottom layer. This is the autopilot motor and this is the connector. These parts are the supporting brackets. You should install it like this. The motor will be located on this part. And this part should be mounted onto the shaft of the tractor. This is the USB to RS232 cable. You can use the cable to connect the motor to our configuration tool and check the motor status or change any setting of the motor. This is the adapter. We supply many different adapter types to match with different tractor models. But for one motor kit, we supply only one adapter. If you need more adapters, please contact our sales reps. when you place order. That’s all for the parts in the package. Thank you!