Brief information of carbide bush hammer plate: 1. Diameter: 125MM, 150MM, 200MM, 250MM, 300MM, 350MM, 400M, 450MM, etc. 2. Roller quantity in per bush hammer: 3PCS, 4PCS, 5PCS, etc.; 3. Segment quantity in per roller: 6pcs, 8pcs, etc.; 4. Mainly used for the stone finishing way of bush hammer finish; 5. Five to six times faster than manual times; 6. The grit of bush hammer face can be adjusted and the size of adaptor decide to its machine. All of our products have been strictly tested before access to market. Other specifications can be customized according to requirements. Functions of Carbide Bush Hammer Roller 1. Bush hammer is used for grinding the surface of granite, marble, concrete and other materials, grind into a rough surface. It plays the role of anti-skid and also can play the role of decoration; 2. The repeated hit of these carbide tips into stone or concrete surface creates a rough, pockmarked texture that looks like naturally weathered rock; 3. This segments of the bush hammer roller is carbide, can be used on hand held grinder machine; 4. It is suggested that the rotational speed is below 700 RPM, bush hammer is 5-6 times faster than manual times, the cost is greatly saved; 5. The grit of bush hammer face can be adjusted and the size of adaptor decide to its machine, other specifications can be customized according to requirements. Features of Bush hammer plate:For processing stone surface, pockmarked texture that looks like naturally weathered rock.