Double cold and double hot toe molding machine HZ-625 Product Description 1) TH-625 is equipped with a relay and electronic controlling system. 2) Used for the production of Strobel-made and flexible footwear. That means the vamp is molded straight or outside. 3) Advantage: similar to the lasting process, the vamp will be molded in the whole toe area up to the instep 4) Important features of construction: * The vamp that has to be molded is held in the toe area by a working tool made according to the contour of the last. * The pulling over process means the aluminum last moves up as other working tools stay closed. * The Teflon tape that is part of the working tool adapts to the aluminum last and holds the leather in shape. * By producing "Strobel-made" footwear the last moves up a second time and molds the upper straight. 5) Important advantages of this machine: * The molding in the toe area is straight, that means no unevenness and no wrinkles. * The machine is equipped with one or two damping units that warm up the thermoplastic toe and steam the upper at the same time.